Video Tag

#animatronic skull

Every video tagged “animatronic skull” in the library — a focused slice of the Halloween archive.

15 videos

Halloween Pop-Up Skull with GLOWING Eyes!

DIY PropsIntermediate$30–$70

Halloween Pop-Up Skull with GLOWING Eyes!

VanOaksProps walks through the construction of a motorized pop-up skull prop featuring glowing red LED eyes, inspired by Eerie Acres Cemetery. The mechanism uses a reindeer motor paired with a full-extension drawer slide to drive the skull upward in a repeating motion. A wooden frame provides the structural base, while nylon balls act as eye sockets for the pre-wired LEDs, and a downloadable 3D-printed mount file is included for easier assembly. The result is an eye-catching, relatively affordable Halloween prop suitable for yard or haunt use.

VanOaksProps· 25,958 views

Talking Skulls, Sound Activated Halloween Prop Powered by PicoTalk

DIY AnimatronicsBeginner

Talking Skulls, Sound Activated Halloween Prop Powered by PicoTalk

FrightProps demonstrates their PicoTalk-powered talking skull prop, which animates a skull's mouth and eyes in response to an audio input signal. The setup is designed for simplicity — connect any audio source and powered speakers, and the PicoTalk controller handles the rest automatically. The result is a convincingly lifelike talking skull effect well-suited for haunted house environments.

FrightProps· 24,842 views

Talking Skull Overview - Our Three Models of Automatic Talking Skulls for Halloween 2019!

Talking Skull Overview - Our Three Models of Automatic Talking Skulls for Halloween 2019!

FrightProps showcases their 2019 lineup of ready-to-run animatronic talking skulls, walking viewers through three distinct models that differ in range of motion and complexity. The overview covers a standard skull with mouth and eye movement, a head-turn variant, and a top-tier three-axis model offering the most dynamic performance. Each model is positioned as a plug-and-play solution requiring no custom fabrication. The video serves as a buyer's guide to help haunters select the right tier for their needs and budget.

FrightProps· 22,483 views

Giant Skull Entry Display | Distortions Behind the Scenes w/ Ed & Marsha

Giant Skull Entry Display | Distortions Behind the Scenes w/ Ed & Marsha

Ed and Marsha Edmunds of Distortions Unlimited offer a behind-the-scenes look at their Giant Skull Entry, a massive prop designed to frame a doorway or entryway. The piece is constructed from latex and foam over a metal armature and stands approximately 14 feet tall and 7 feet wide. In this short clip, the duo focuses on the aesthetic decisions around the skull's eye treatment. The prop is built to disassemble for easier transport and storage, making it practical for professional venues.

DistortionsUnlimited· 17,318 views

Automatic Talking Skull - No Programming Required!

Automatic Talking Skull - No Programming Required!

FrightProps showcases their Three Axis Talking Skull, which now features an Auto-Talk mode that automatically syncs jaw and axis movement to any dialogue audio you provide — no programming or controller configuration needed. The short demo highlights how simple it is to get a realistic talking skull up and running straight out of the box. It's a ready-to-run solution aimed at haunters who want professional animatronic results without a steep technical learning curve.

FrightProps· 16,825 views

FrightProps 3 Axis Talking Skull Programming Overview

DIY AnimatronicsIntermediate

FrightProps 3 Axis Talking Skull Programming Overview

FrightProps walks through the programming setup for their 3-axis talking skull, a pneumatic animatronic prop capable of realistic head movement and lip sync. The tutorial covers the configuration process needed to get the skull performing coordinated motion and speech playback. At 14 minutes, it provides a focused, step-by-step overview suitable for new and returning FrightProps customers alike.

FrightProps· 13,299 views

FrightProps Talking Skulls Skinz

FrightProps Talking Skulls Skinz

FrightProps showcases their talking skull animatronics fitted with soft latex Skinz overlays designed to give the mechanical skulls a more realistic, fleshed appearance. The short demonstration highlights how the latex skins integrate with the moving jaw mechanism to enhance the overall effect. It serves as both a product showcase and a quick look at an easy upgrade for existing talking skull props.

FrightProps· 11,655 views

Talking Skull Jaw Movement Servo Kit

DIY AnimatronicsBeginner

Talking Skull Jaw Movement Servo Kit

FrightProps walks through their plug-and-play servo kit designed to add realistic jaw movement to standard plastic skulls. The kit pairs with a compatible controller — such as their own ServoTalk unit — to synchronize the jaw motion with spoken audio or dialogue. The result is a convincing talking skull animatronic without requiring custom fabrication or advanced electronics knowledge.

FrightProps· 5,809 views

Three Axis Automatic Talking Skull Settings Tutorial

DIY AnimatronicsBeginner

Three Axis Automatic Talking Skull Settings Tutorial

This short tutorial from FrightProps walks users through adjusting the settings on their Three Axis Automatic Talking Skull animatronic prop. The video covers the configuration options that control the skull's movement axes, helping owners get the best performance out of the prop. At just four minutes, it serves as a quick-start reference for new owners getting their skull dialed in.

FrightProps· 5,353 views

Village Mire VSA Routines

DIY AnimatronicsAdvanced

Village Mire VSA Routines

This short clip showcases animatronic skull routines for a Village Mire haunt scene, built using a Skulltronix skull by Jerry Jewell. The creator walks through a workflow that moves from programming VAS routines in TrackSkull (MonkeyBasic) to importing them into VSA and finally exporting the finished sequences into a RAPU controller. The result is a fully synchronized, controller-driven skull performance ready for deployment in a yard or home haunt.

Hauntcast· 4,008 views

Installing Mounting Neck Bones on a Talking Skull with Head Turn Capabilities

DIY AnimatronicsBeginner

Installing Mounting Neck Bones on a Talking Skull with Head Turn Capabilities

This short FrightProps tutorial walks through the installation of mounting neck bones onto a talking skull prop to enable head-turn movement. The video covers the assembly steps needed to properly attach the neck bone component so the skull can pan or rotate as part of an animatronic setup. It is a focused, product-specific guide aimed at owners of FrightProps talking skull systems.

FrightProps· 3,514 views

How to Make Two Talking Skulls Talk to Each Other

DIY AnimatronicsIntermediate

How to Make Two Talking Skulls Talk to Each Other

FrightProps demonstrates how to make two animatronic talking skulls carry on a back-and-forth conversation by splitting a stereo audio track into its left and right channels and routing each channel independently to a separate skull. The technique relies on audio editing software to compose and pan dialogue, then standard audio cables to deliver each voice to the correct prop. The method is compatible with FrightProps standard, head-turn, and three-axis skull variants. The result is a convincing dual-skull dialogue scene requiring no specialized controllers beyond what the skulls already use.

FrightProps· 2,232 views

An inside look at my 3-axis skull greeter

DIY AnimatronicsAdvanced

An inside look at my 3-axis skull greeter

This short showcase highlights a finished 3-axis animatronic skull greeter built around a Skulltronix skull and controlled via a RAPU unit. Seven animation routines were created using TrackSkull from MonkeyBasic, then imported into VSA before being transferred to the RAPU for seamless, continuous looping playback. The build demonstrates a full software-to-controller pipeline common in intermediate-to-advanced home haunt animatronics.

Hauntcast· 1,292 views

Village Mire - Skully greeting ToTs

Village Mire - Skully greeting ToTs

A short showcase clip from the Village Mire home haunt featuring a 3-axis animatronic skull greeting trick-or-treaters. The skull is a purchased unit from Skulltek, paired with a custom professional voice-over to bring the character to life. The clip offers a guest-eye view of how an interactive talking skull prop performs in a real yard haunt setting.

Hauntcast· 1,023 views

Animatronic Skull Tutorial: The Prop Shop

DIY AnimatronicsBeginner

Animatronic Skull Tutorial: The Prop Shop

Lew Gorman of Grave Rot Studios walks viewers through building a simple animatronic skull using a repurposed reindeer motor. The tutorial is presented as part of Hauntcast's Prop Shop segment, keeping the build approachable for haunters at most skill levels. Supporting images and video are available on the Hauntcast website for those who want a closer look at the steps involved.

Hauntcast· 234 views