Video Tag
Every video tagged “dark ride” in the library — a focused slice of the Halloween archive.
279 videos
Poison Props showcases the SF1227 Statue Fall, a large-scale pneumatic animatronic designed to perch atop an 8-foot graveyard tomb. On trigger, the statue's arms spread wide, a ghoul figure lurches forward with a bending torso, and the head sweeps side to side for maximum startling effect. The unit ships as a complete plug-and-play package including the character, rig, pneumatics, a pre-programmed controller, and a motion sensor, with an optional audio bundle available. Its substantial footprint makes it best suited for professional haunted attractions or ambitious large-scale home haunts.
The Poison Props CG1040 Clown Grabber is a ready-to-run pneumatic animatronic designed for haunted attractions and Halloween events. The clown figure leans back then thrusts forward on a double pivot, with arms that flail and grab while the head turns side to side — a classic startle-scare sequence. The package ships complete with the character, pneumatics, a pre-programmed controller, motion sensor, digital audio player, powered speaker, and a scream audio effect. With a compact footprint and plug-and-play setup, it requires only AC power and a 100 PSI air supply to operate.
The CDC1215 Ceiling Dweller Clown from Poison Props is a commercial-grade pneumatic animatronic designed for haunted attractions and dark rides. When triggered by its included motion sensor, the clown drops from the ceiling and performs multiple head movements for a high-impact startle scare. The unit ships as a plug-and-play package complete with pneumatics and a pre-programmed controller, with an optional audio package available. Mounting hardware is included for straightforward installation.
Poison Props showcases the CWL1048 Circus Wheel Lunger, a large-scale pneumatic animatronic featuring a female character strapped to a spinning circus wheel. On trigger, the figure lunges approximately four feet forward while articulated arms reach and grab with bending elbows and a moving head. The unit ships as a complete plug-and-play package including the wheel, character, pneumatics, programmed controller, motion sensor, and a digital audio system with scream effects. It is designed as a high-impact startle scare for professional haunted attractions and dark rides.
The Poison Props MTL1220 Mourner Turn & Lunge is a commercial-grade pneumatic animatronic featuring a kneeling mourner figure that dramatically turns 180 degrees, lunges forward, and opens its arms while the head sweeps side to side. The unit ships as a complete plug-and-play package including the character, rig, pneumatics, programmed controller, and motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect for a fully immersive scare. The rig has a defined footprint and requires compressed air and AC power to operate.
The GC101 Giant Attack Clown from Poison Props is a massive 9-foot pneumatic animatronic that lunges up to 8 feet toward guests with a triggered clown laugh. The complete package includes the character, pneumatic hardware, a pre-programmed controller, motion sensor, digital audio player, powered speaker, and a scream sound effect. It is designed for professional haunted attractions, dark rides, and amusement park environments. An optional large metal base stand is available as an add-on.
The Poison Props CD525 is a professional-grade pneumatic clown animatronic designed to hide overhead and then plunge downward while wildly flailing its arms to startle passing guests. The plug-and-play system ships complete with the character, pneumatics, a pre-programmed controller, and a motion sensor, so no additional programming is required. An optional audio package adds a digital player, powered speaker, and scream effect for a fully immersive scare. The compact wall-mount rig bracket is engineered to slide onto the top of standard maze walls, making installation straightforward for haunted attractions and dark rides.
The Poison Props CMS1032 Clown Mirror Slammer is a plug-and-play professional animatronic prop that uses a two-way mirror illusion to hide an evil clown character until activation. Upon triggering, the lighting switches to reveal the clown slamming against the glass while her head turns side to side, accompanied by dual strobes and a scream audio effect. The self-contained package includes the wall panel, rig, character, pneumatics, programmed controller, motion sensor, and a full audio system. Interchangeable characters allow the mechanism to be adapted to different haunt themes.
The PM1320 Praying Monk is a commercial-grade pneumatic animatronic from Poison Props featuring a kneeling monk figure that rotates 180 degrees, then lunges upward and forward while spreading its arms and turning its head. The complete package ships plug-and-play with the character, rig, pneumatics, a pre-programmed controller, and a motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect. Characters are interchangeable across Poison Props mechanisms, offering flexibility for different haunt themes.
Poison Props showcases the DCV702 Decap Chainsaw Victim, a fully pneumatic plug-and-play animatronic designed for haunted houses and dark rides. The sequence features a chained victim in a chair whose head is severed by a live actor wielding a chainsaw, triggering convulsing body movements, a flying head, and an optional blood/water spitter effect. The head automatically resets onto the body after the sequence, making it repeatable for high-throughput attractions. The compact footprint and bundled controller, motion sensor, and audio package make it a turnkey scare solution.
The PSF1136 Pirate Sword Fight is a two-character pneumatic animatronic from Poison Props featuring a pair of sword-wielding pirate figures stationed roughly 12 feet apart. On trigger, one pirate leaps upward while the other shoots across the room on a scissor-throw mechanism, with both characters raising swords to clash mid-air. Arm lifts, elbow bends, and head movements add realism to the scene. The unit ships as a complete plug-and-play package including characters, pneumatics, a programmed controller, and a motion sensor, with an optional audio package available.
This video showcases the TDN1145 Torso Drop Nun, a professional pneumatic animatronic prop from Poison Props. The evil nun figure conceals itself above a maze wall, then violently drops down with wildly flailing arms to startle passing patrons. The unit ships as a complete plug-and-play system including the character, pneumatics, a pre-programmed controller, and a motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect for a fully immersive scare.
The GBG1302 Ground Breaker Grabber from Poison Props is a plug-and-play pneumatic animatronic designed to simulate a zombie rising from the grave and snatching at guests' ankles. The figure starts slumped, then rises, reaches out, and turns its head side to side when triggered by a built-in motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect for a fully immersive scare. Characters are interchangeable across mechanisms, allowing the prop to be adapted to different haunt themes.
The ALA1132 Asylum Lean Attack from Poison Props is a dual-character pneumatic animatronic designed for haunted houses and dark rides. Two asylum escapee ghouls wait concealed behind a wall, then execute a coordinated multi-axis attack sequence — the lower ghoul launches upward, the upper ghoul twists and turns its head, and both figures deploy grabbing arm movements. The unit ships as a complete plug-and-play package including characters, rig, pneumatics, a programmed controller, and a motion sensor, with an optional audio package available. Wall panel is not included and must be sourced separately.
Poison Props showcases the SWC1306 Spider Wall Crawl, a commercial-grade pneumatic animatronic designed for haunted houses and dark rides. The prop mounts to the top of a maze wall, drops down roughly 18 inches, and lunges outward to deliver a startle scare. It arrives as a plug-and-play unit complete with the spider character, pneumatics, a programmed controller, and a motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect.
The LT1118 Lunatic Twitcher from Poison Props is a commercial-grade pneumatic animatronic featuring a restrained psycho character that lunges forward and violently twitches side to side with a flailing head and scream. The unit ships as a complete plug-and-play system, including the character, pneumatics, a pre-programmed controller, and motion sensors. An optional audio package adds a digital player, powered speaker, and scream effect. It requires only an AC power outlet and a 100 PSI air supply to operate.
The Poison Props DV1323 is a plug-and-play pneumatic vampire animatronic designed for haunted attractions and dark rides. The character conceals itself at ten feet overhead, then drops at a 45-degree angle to bring its face within close range of patrons while its arms spread and head turns side to side. The complete package includes the character, pneumatics, a pre-programmed controller, motion sensor, digital audio player, powered speaker, and a scream effect. A compact footprint and roughly 15-minute setup make it practical for tight maze corridors.
The Poison Props FM1321 Falling Monk is a professional-grade pneumatic animatronic designed to mount above standard 8-foot haunt maze walls and lunge dramatically forward toward guests. The figure's torso bends, one arm reaches out, and the head bobs up and down for a convincing, multi-axis startle scare. The unit ships as a complete plug-and-play package including the character, rig, pneumatics, programmed controller, and motion sensor, with an optional add-on audio package. A minimum 14-foot ceiling clearance and a 100 PSI air source are required for operation.
Poison Props showcases their JB409 Jack in the Box, a large-scale commercial animatronic prop in which a clown character hides inside a neon cube and launches upward upon activation, swinging a knife and emitting maniacal laughter. The unit is a fully integrated package that includes pneumatics, a programmed controller, motion sensor, strobe light, fog machine, digital audio player, powered speaker, and a scream audio effect. It is built for haunted houses, dark rides, and amusement park installations requiring 100 PSI compressed air and AC power. Interchangeable character heads add versatility for operators who want to customize the look of the scare.
The CPT407 Clown Peek-A-Boo is a ready-to-run pneumatic animatronic prop from Poison Props in which a clown character stands with arms covering its face before lunging forward when triggered. The unit ships complete with the character, pneumatics, a programmed controller, and a motion sensor for automatic activation. An optional audio package adds a digital player, powered speaker, and scream effect to amplify the scare. Heads are interchangeable across the manufacturer's mechanism lineup, offering customization flexibility.
PoisonProps showcases their BM1018 Bloody Mary animatronic, a pneumatic wall-mounted scare prop that uses a two-way mirror to conceal the character until activation. When triggered, the lights shift, Bloody Mary is revealed, and she slams against the glass while her head turns — delivering a high-impact startle scare. The unit is fully plug-and-play, arriving complete with the wall panel, rig, character, pneumatics, programmed controller, motion sensor, and an audio package. It is designed for haunted attractions, dark rides, and similar professional environments.
The BCS302 Banging Clown Shutters is a professional-grade pneumatic prop from Poison Props designed to startle guests in haunted attractions and dark rides. The shutters violently bang open and closed, producing a loud, jarring sound effect on trigger. The unit ships as a complete package including shutters, pneumatic hardware, a controller, and a motion sensor — ready for installation.
Poison Props showcases their WDL1311 Witch Door Leaper, a commercial-grade pneumatic animatronic in which a witch concealed behind a door launches outward up to five feet, raising and spreading her arms while her head lifts and rotates. The unit ships as a complete plug-and-play package including the character, door rig, pneumatics, a programmed controller, and a motion sensor. An optional audio bundle adds a digital player, powered speaker, and scream effect for a fully immersive startle scare.
The Poison Props CTF301 Clown Table Flopper is a professional-grade pneumatic animatronic featuring a clown character that rises from a lying position and kicks its legs wildly while emitting manic laughter. The unit ships as a complete package including the character, pneumatics, a pre-programmed controller, and a motion sensor, with an optional audio package adding a digital player, powered speaker, and scream effect. The table itself is sold separately. Character heads are interchangeable across Poison Props mechanisms, offering customization flexibility for haunt designers.
