Video Tag
Every video tagged “escape room” in the library — a focused slice of the Halloween archive.
87 videos
Wicked Makers built a fully immersive Poppy Playtime escape room around their previously constructed life-sized DogDay animatronic, constructing a detailed jail cell set complete with puzzles, traps, and interactive surprises. Friends Evan and Katelyn were invited to test the experience against a 20-minute countdown. The build combines 3D printing, foam fabrication, servo mechanics, and pneumatic elements to bring the video game environment to life. It serves as an inspiring example of giving a large animatronic build a purposeful, repeatable interactive context.
Wicked Makers built a fully interactive DogDay animatronic from the Poppy Playtime franchise and placed it at the center of a live escape room challenge. Two participants were locked in and had to contend with the character as part of the experience. The build appears to combine 3D printing and pneumatic mechanisms to bring the Smiling Critters character to life. It showcases how DIY creators can merge prop-building skills with immersive game design.
This FrightProps tutorial walks through wiring a keypad trigger to a magnetic lock so that entering the correct code releases the lock — a classic escape room mechanic. The setup is presented as beginner-friendly and budget-conscious, requiring only a few off-the-shelf components. A companion wiring diagram is provided on the FrightProps website to guide the build. It's a clean, practical demonstration suitable for haunted attractions and escape rooms alike.
VanOaksProps walks through a straightforward process for turning lightweight foam into convincingly aged wooden boards using basic carving and texturing tools. The technique layers multiple acrylic paint colors and a glazing medium to build realistic wood grain depth and an old, weathered appearance. At under 10 minutes, the tutorial covers the full workflow from raw foam to finished faux plank. The result is a lightweight, cost-effective alternative to real lumber for haunted house panels, escape rooms, or stage set construction.
VanOaksProps walks through a beginner-friendly method for building realistic creepy vines using backer rod foam, shop towels, and common craft supplies. The technique is flexible enough to suit jungle dioramas, pumpkin patches, haunted house sets, or escape room builds. Painting steps using spray paint and acrylic layering give the finished vines an organic, weathered look. The whole build relies on affordable, widely available materials making it accessible for most budgets.
This highlight reel captures Distortions Unlimited's booth presence at the Transworld Halloween and Attractions (HAA) trade show across multiple years in St. Louis. The video showcases the company's lineup of high-end animated Halloween props and monsters, including zombies, gargoyles, sleeping giants, and more. As a major manufacturer in the dark attractions industry — with television exposure on the Travel Channel's Making Monsters — Distortions Unlimited uses the HAA convention to connect with haunted house operators, corn maze owners, and escape room designers. It serves as both a product showcase and an industry event overview.
This FrightProps tutorial demonstrates how to automate an inexpensive fog machine by intercepting its wired manual remote and routing control through a relay or solid-state output on a prop controller. The technique — often called 'hacking the remote' — is presented as a practical workaround for fog machines that lack DMX capability. Both haunt-focused controllers like the PicoBoo and escape-room controllers like the EscapeKeeper are shown as compatible options. The result is timed or sensor-triggered fog activation without needing a premium DMX-enabled fog machine.
Distortions Unlimited showcases their lineup of new Halloween animatronics and decorations for 2019, as debuted at the Halloween and Party Expo. The reel highlights a range of animated props spanning themes like zombies, skeletons, clowns, and aliens. Products are aimed at a wide market including professional haunted attractions, escape rooms, corn mazes, and home yard haunts. With over four decades in the industry, Distortions Unlimited positions itself as a trusted name in quality monster-making and haunt prop manufacturing.
FrightProps showcases their Electric Door Knocker and Wall Pounder, a prop designed to simulate realistic knocking, pounding, or banging sounds against solid surfaces. Unlike many similar effects, this unit runs entirely on electricity with no pneumatics required, making it especially well-suited for escape rooms and haunted attractions where compressed air is unavailable or impractical. The prop can be hidden discreetly behind doors, walls, or inside cabinets to create an unsettling knocking effect that guests cannot easily locate.
This FrightProps tutorial walks through building an interactive chess board puzzle for an escape room using RFID triggers and an EscapeKeeper controller. Players must place the correct chess pieces on the correct squares to solve the puzzle and trigger a response. The build concept is modular and transferable — the same RFID object-placement logic can be adapted to many other puzzle types beyond chess.
Distortions Unlimited showcases Body of Evidence, an interactive prop designed for escape rooms and haunted attractions. Players assemble pieces onto a body, and once complete the prop triggers an additional clue before the body parts drop to the floor one at a time. The short demo highlights how the prop functions as both a puzzle element and a startling reveal.
FrightProps offers a quick first-person walkthrough of their booth setup ahead of Chicago's Room Escape Conference. The short preview gives escape room operators and enthusiasts a glimpse of the props and supplies FrightProps planned to showcase at the event. Viewers are invited to visit the booth in person to pick up free catalogs and promotional materials.
FrightProps demonstrates how to engineer a sudden, powerful burst of fog using a pneumatic air amplifier, a solenoid valve, a fog machine, and a PicoBoo JR controller. The combination allows a triggered, on-demand fog blast ideal for dramatic scare moments. The effect suits a variety of haunt themes, including quarantine chambers, ruptured steam pipes, and dragon breath gags. At roughly six minutes, the video is a compact, product-focused walkthrough of the complete system.
This FrightProps tutorial demonstrates how to use a PicoBoo ONE controller to trigger a magnetic lock, directly answering a frequently asked escape room question. The video walks through a three-component setup — trigger, controller, and lock — using items from FrightProps' Escape Room Magnetic Lock Starter Kit. A proximity sensor is also demoed as a potential trigger source. Together these components open up a wide range of interactive puzzle possibilities for escape rooms and haunted attractions.
This FrightProps tutorial walks through building an interactive escape room puzzle that uses RFID triggers and an EscapeKeeper controller to detect when players place specific objects in designated locations. The system uses relay outputs to trigger effects or unlock mechanisms once the correct objects are correctly positioned. The video covers the full workflow from hardware setup to puzzle logic, making it a practical guide for escape room builders and haunted attraction designers alike.
FrightProps demos the EscapeKeeper, a dedicated controller built to power escape room puzzles without requiring any programming knowledge. The device aims to simplify the creation of interactive puzzle sequences through an approachable, code-free interface. The video walks through its features and positions it as a versatile all-in-one solution for escape room builders.
FrightProps showcases a fully functional mini escape room built for their staff Halloween party, demonstrating seven of their own escape room props and triggers in a live playthrough. The setup chains multiple interactive puzzles — including a keypad, haunted phone, turning statue, human circuit, tile puzzle, weight detector, and RFID trigger — so each solved puzzle unlocks the next. A BooBox FlexMax controller ties everything together, managing sound, lighting, and sequential prop activation throughout the experience.
FrightProps showcases their 'Body of Evidence' interactive prop designed for escape rooms and haunted attractions. The prop features six detachable body parts — two arms, two legs, a torso, and a head — each of which triggers a unique audio cue when placed on its corresponding electromagnet. Once all six parts are assembled, the body dramatically collapses piece by piece and fires a dry contact output that can activate secondary effects such as hidden doors, black lights, or audio clues. The prop ships ready to use with built-in audio and lighting, requiring only an AC power source.
This FrightProps tutorial walks through wiring and configuring a laser-and-sensor system that releases a magnetic lock when the beam is broken or aligned with its target. A PicoBoo controller serves as the logic hub, making the setup accessible without complex programming. The combination is well-suited for escape room puzzles or haunted house interactive sequences where a physical action triggers a door or compartment to unlock.
FrightProps showcases the Faux Fone, a device designed to turn any standard touch-tone telephone into a fully interactive escape room or haunt prop. The video walks viewers through the product's features and potential applications in escape rooms and haunted attractions. It appears to cover setup and integration, demonstrating how the unit interfaces with existing phones to create engaging, interactive guest experiences.
FrightProps walks through their Press the Buttons Puzzle Kit, a ready-made controller that lets you build a button-sequence puzzle for escape rooms or haunted attractions using up to six buttons. The standout feature is a no-code setup process — you simply act out the correct solution sequence and the kit records it automatically. The video covers how to get the kit running and how to reprogram the solution on the fly without any technical knowledge.
This tutorial walks viewers through the foundational concepts of using FrightProps' Director Software to operate and program a prop controller. Created by Bizzaro Galore of the Test Subjects channel, the video covers core techniques applicable to haunted attractions and escape rooms alike. It serves as an accessible entry point for anyone new to haunt show-control software.
This behind-the-scenes look at MurderCo showcases what is billed as the nation's first R-rated horror escape room experience, located in Upland, California. Black Market Escape Rooms discusses how Gantom lighting technology contributes to crafting deeply immersive, horror-themed environments. The short featurette offers a glimpse into the design philosophy and atmosphere that sets this adult-oriented escape experience apart.
This FrightProps overview demonstrates how to set up and program the Gantom Torch: Escape, a handheld LED device designed for escape room use. Small emitters placed around the room secretly allow operators to control the torch's color, intensity, and vibration in players' hands via the Color Piano software interface. A key feature is UV light output, which can be triggered at specific times or locations to reveal hidden clues. The system creates a compelling illusion of player agency while keeping full control with the operator.
