Halloween Universe

Video Tag

#Stiltbeast Studios

Every video tagged “Stiltbeast Studios” in the library — a focused slice of the Halloween archive.

186 videos

Great Stuff Spray Foam DIY Pumpkin
14:51
DIY PropsIntermediate

Great Stuff Spray Foam DIY Pumpkin

Stiltbeast Studios walks through the process of creating a Halloween pumpkin prop using Great Stuff expanding spray foam. The build demonstrates how an accessible, hardware-store material can be shaped into a convincing haunted-attraction-quality piece. Allen Hopps shares his hands-on fabrication approach suited for home haunters and professional prop makers alike.

StiltbeastStudios· 809,233 views
spray painting plastic- best primer
9:11
DIY PropsBeginner

spray painting plastic- best primer

Stiltbeast Studios tackles one of the most common frustrations in prop-making — getting paint to stick to plastic — by identifying a preferred primer through hands-on testing. The video walks through why plastic is a difficult surface to paint and what makes this particular primer perform better than alternatives. Real-world adhesion tests are shown to back up the recommendation rather than relying on speculation alone.

StiltbeastStudios· 155,466 views
Krampus mask 2
21:34
DIY PropsIntermediate

Krampus mask 2

Stiltbeast Studios walks through the process of building plastic horns from scratch and breathing new life into an existing latex Krampus mask. The video covers a range of prop-making and finishing skills applicable to haunted attraction and home haunt builds alike. It's a multi-technique session that blends fabrication and refurbishment into a single cohesive project.

StiltbeastStudios· 143,879 views
How to foam fill masks cheaply
14:29
DIY PropsBeginnerlow / budget-friendly

How to foam fill masks cheaply

Stiltbeast Studios demonstrates a budget-friendly method for foam-filling prop heads and latex masks intended for haunted attraction use. The technique exploits the expanding foam that Gorilla Glue generates as it cures, turning a normally unwanted side effect into a useful filling material. The result is a sturdier, haunt-ready prop head without significant material cost.

StiltbeastStudios· 115,090 views
burlap mask tutorial scarecrow
23:37
Makeup TutorialsBeginner$20–$40

burlap mask tutorial scarecrow

Allen Hopps of Stiltbeast Studios walks through the construction of a wearable burlap scarecrow mask that is entirely latex-free and completable in roughly an hour and a half. The build relies on inexpensive, readily available materials including burlap bags, a spray sock base, and contact cement. Spray paints in earthy tones are used to finish and unify the look. The result is a convincingly creepy, lightweight scarecrow mask suitable for haunted house performers or costume use.

StiltbeastStudios· 76,870 views
Wednesday Mask Paint A Thon!
3:26:34
Makeup TutorialsIntermediate

Wednesday Mask Paint A Thon!

Stiltbeast Studios hosts an extended paint-a-thon session focused on painting a Halloween mask, streamed in a marathon-length format. The session appears to walk viewers through the process of bringing a mask to life with paint and detail work. Given the channel's professional haunt background, techniques are likely geared toward achieving high-quality, haunt-ready results.

StiltbeastStudios· 67,673 views
intro vid
2:19
Other

intro vid

This short introductory video outlines the mission of Stiltbeast Studios: to create a growing reference library of DIY techniques for haunted house builders and haunted attraction operators. It gives prospective viewers a quick overview of the kind of content they can expect from the channel. No specific builds or tutorials are featured in this video itself.

StiltbeastStudios· 60,420 views
LED spotlight tutorial
22:27
Lighting TutorialsBeginnerlow cost (budget-friendly)

LED spotlight tutorial

Stiltbeast Studios walks through a simple, budget-friendly method for building custom LED mini spotlights suited for Halloween shows, displays, or home haunts. Pre-wired LEDs and an affordable transformer/power supply are the core components, keeping the build accessible to beginners. The tutorial emphasizes practicality and cost-effectiveness without sacrificing visual impact.

StiltbeastStudios· 59,839 views
carvewright demo.wmv
6:26
DIY Props

carvewright demo.wmv

Allen Hopps of Stiltbeast Studios demonstrates the CarveWright automated CNC carving machine he has added to his prop-building shop. The video highlights the machine's capabilities for wood carving and sign making in a Halloween prop-fabrication context. It serves as an enthusiastic introduction to the equipment rather than a step-by-step tutorial.

StiltbeastStudios· 59,317 views
tentacle1
21:51
DIY Props

tentacle1

This video from Stiltbeast Studios focuses on the construction of a tentacle prop, likely intended for haunted house or creature display use. Stiltbeast Studios is a well-known name in professional-level Halloween and haunt prop fabrication. The roughly 22-minute runtime suggests a detailed build or process walkthrough. Given the channel's reputation, viewers can expect high-quality craftsmanship and practical fabrication techniques.

StiltbeastStudios· 58,445 views
corpsing2
18:31
DIY PropsIntermediate

corpsing2

Stiltbeast Studios returns with an updated and expanded guide to plastic corpsing, covering new tricks and techniques not included in the original video. The tutorial focuses on achieving realistic corpse-like textures and finishes on Halloween props for haunted attractions and home haunts. With nearly 20 minutes of content, it offers a deeper dive into the craft than its predecessor.

StiltbeastStudios· 57,775 views
make any mask a scarecrow DIY altering a mask scarecrow display secrets
9:14
DIY PropsBeginner

make any mask a scarecrow DIY altering a mask scarecrow display secrets

Stiltbeast Studios walks through how to transform an ordinary mask into a convincing scarecrow character, sharing tips on altering and staging the look for maximum scare impact. The video covers both wearable costume use and static display presentation. It's a practical, accessible guide for haunters looking to get more mileage out of existing mask inventory.

StiltbeastStudios· 57,177 views
Making a two part mold 2
20:40
DIY PropsIntermediate

Making a two part mold 2

Allen Hopps of Stiltbeast Studios walks through the process of constructing a two-part mold intended for casting latex masks. The tutorial covers the key steps and considerations involved in splitting a mold correctly to produce clean, wearable results. This is the second installment in what appears to be a multi-part series on mask fabrication.

StiltbeastStudios· 51,154 views
brain sculpt part 1.wmv
9:57
DIY PropsIntermediate

brain sculpt part 1.wmv

Stiltbeast Studios kicks off a multi-part series with this first installment focused on sculpting a realistic brain using water-based clay. The video walks viewers through the early stages of the sculpt, with subsequent parts covering the completed sculpture and the molding process. It reflects the studio's professional-level approach to creature and effects work.

StiltbeastStudios· 49,994 views
caulk mold part 3
19:47
DIY PropsIntermediate

caulk mold part 3

This is the third installment in Stiltbeast Studios' silicone caulk mold-making series, continuing the step-by-step process of building a prop mold using readily available silicone caulk. As a multi-part series entry, it likely builds directly on techniques and progress established in the previous two episodes. Viewers following along will see the mold construction advance toward a finished, castable form.

StiltbeastStudios· 46,493 views
silicone caulk mold part 2.wmv
8:06
DIY PropsIntermediate

silicone caulk mold part 2.wmv

This is the second installment in Stiltbeast Studios' series on building a silicone caulk mold intended for casting resin masks. The video continues the step-by-step mold-making process from where part one left off. It covers the practical techniques involved in working with silicone caulk as an accessible mold-making medium for prop and mask fabrication.

StiltbeastStudios· 44,094 views
Hand extensions
21:36
Costume TutorialsIntermediate

Hand extensions

Stiltbeast Studios presents a tutorial on building and wearing hand extensions to enhance creature or monster costumes. The video likely covers fabrication and fitting techniques to create the illusion of elongated, inhuman hands. At roughly 22 minutes, it offers a solid overview of the craft for costume builders and creature performers.

StiltbeastStudios· 43,744 views
Make Venom locktite foam bust Halloween display Marvel comics
27:29
DIY PropsIntermediate

Make Venom locktite foam bust Halloween display Marvel comics

Stiltbeast Studios walks through the process of building a Venom-themed foam bust for use as a Halloween display or haunted attraction prop. The build draws on Marvel comics source material to capture the character's iconic look using foam fabrication techniques. At roughly 27 minutes, the video offers a solid overview of how foam can be shaped and assembled into a dramatic character bust. It's a great example of how pop-culture characters can be translated into striking Halloween set pieces.

StiltbeastStudios· 41,533 views
Clear tape bodies.wmv
21:07
DIY PropsBeginner~$10 per body

Clear tape bodies.wmv

Allen Hopps of Stiltbeast Studios demonstrates a remarkably simple technique for creating realistic prop bodies using nothing more than saran wrap and clear packing tape. The method produces full-form body shapes suitable for haunted attraction set dressing or monster displays at a fraction of the cost of commercial props. The approachable process requires no sculpting experience or expensive materials, making it one of the most accessible body-prop techniques available to home haunters and professional attraction builders alike.

StiltbeastStudios· 38,917 views
Spell book
13:27
DIY PropsIntermediate

Spell book

Stiltbeast Studios walks through the creation of a Halloween spell book prop in this roughly 13-minute build video. The finished piece is designed to look like an aged, mystical tome suitable for witch, occult, or dark fantasy displays. Given the channel's reputation for detailed prop work, viewers can expect practical fabrication and finishing techniques throughout.

StiltbeastStudios· 37,646 views
Tooth plate .m4v
19:47
DIY PropsBeginnerlow-cost / budget-friendly

Tooth plate .m4v

Allen Hopps of Stiltbeast Studios walks through the process of creating cheap, convincingly grungy prop teeth suitable for haunted house sets, costumes, masks, and props. The technique centers on an affordable material — specialty glue sticks — to achieve a gross, decayed tooth aesthetic without a large budget. The result is a versatile prop element that can be applied across a wide range of Halloween and haunt applications.

StiltbeastStudios· 36,343 views
moving critters
17:12
DIY AnimatronicsIntermediate

moving critters

Stiltbeast Studios walks through the process of building small animatronic critters without spending a lot of money. The video focuses on achieving convincing movement in miniature creature props using budget-friendly methods. At 17 minutes, it offers a practical, hands-on look at low-cost animatronic construction techniques.

StiltbeastStudios· 34,387 views
LATEX MASK MAKING TALK THROUGH
20:58
DIY PropsIntermediate

LATEX MASK MAKING TALK THROUGH

Allen Hopps of Stiltbeast Studios walks viewers through the full latex mask-making process in a single consolidated overview, condensing material that is otherwise spread across many hours of separate videos. Rather than a step-by-step hands-on tutorial, this is a high-level talk-through designed to give beginners and intermediate makers a clear mental map of the entire workflow before they dive deeper. The goal is to help viewers ask smarter, more targeted questions as they pursue the craft further.

StiltbeastStudios· 33,619 views
Make a Silicone half mask Mask $74
22:30
DIY PropsIntermediate~$74

Make a Silicone half mask Mask $74

Stiltbeast Studios walks through the process of creating a wearable silicone half mask on a budget, with the finished project coming in around $74. The tutorial is aimed at haunters and prop makers who want a professional-looking result without a massive materials investment. At 23 minutes, it covers the core steps of silicone mask fabrication in a focused, practical format.

StiltbeastStudios· 33,549 views