Halloween Universe

Video Theme

Movie Replica

Videos built around the movie replica theme — pulled together so you can study how others bring this atmosphere to life.

28 videos

Minecraft Movie Sword – I Built a Real One (DIY)
14:46
DIY PropsIntermediate

Minecraft Movie Sword – I Built a Real One (DIY)

The creator reverse-engineers the iconic sword from the Minecraft Movie — originally fabricated by Wētā Workshop — using only a blurry screenshot as reference. Working with laser-cut plywood layers and strategic paint techniques, he builds a screen-accurate-looking replica without any official plans. A free downloadable template and guide are offered on his website for viewers who want to replicate the build. The finished prop is revealed at the end of the video.

Creative Geekery· 33,702 views
3D Printed Jurassic Park Cryo Can (Fast Build) #3dprinting #jurassicpark #propmaking
0:26
DIY Props

3D Printed Jurassic Park Cryo Can (Fast Build) #3dprinting #jurassicpark #propmaking

This short-form video showcases the rapid transformation of raw 3D printed plastic into a screen-accurate Jurassic Park cryo can prop. The build is presented as a fast time-lapse, giving viewers a quick look at the finishing process without deep tutorial detail. The channel focuses on full movie-inspired prop builds for fans of the franchise.

Creative Geekery· 21,957 views
DIY Foam Axe Prop!
8:23
DIY PropsIntermediate$30–$70

DIY Foam Axe Prop!

VanOaksProps walks through the full build process for a foam replica of Jack Torrance's iconic axe from The Shining, designed to be lightweight and safe for Halloween haunts and convention use. The blade and handle are both constructed from EVA foam floor mats, shaped with a heat gun and Dremel, then finished with a multi-step painting process that mimics real steel and wood grain. Sponsored Surebonder Cosplay Stik hot glue is used throughout the assembly. The result is a screen-inspired prop that is durable, convention-compliant, and visually convincing.

VanOaksProps· 21,478 views
The Shining Replica “Jack Torrance” Axe (Trick or Treat Studios) UNBOXING
4:29
Prop Reviews

The Shining Replica “Jack Torrance” Axe (Trick or Treat Studios) UNBOXING

Haunt Former unboxes the officially licensed Jack Torrance axe replica from Trick or Treat Studios, based on the iconic prop from Stanley Kubrick's The Shining. The short review gives horror fans and haunters a close-up look at the collectible before purchasing. It's part of the channel's Haunt-Tober 2018 series of Halloween-focused content.

Haunt Former· 20,875 views
I Made a Functional Gonk Droid Projector
18:40
DIY PropsIntermediate

I Made a Functional Gonk Droid Projector

VanOaksProps presents a full-length, single-video build of a functional full-size Gonk Droid prop that doubles as a working projector. The build combines everyday materials like storage bins and plumbing parts with 3D printed components, then brings the droid to life through careful painting and weathering techniques. Originally released as a two-part series in 2022, this marathon edition walks through every stage — design, fabrication, electronics integration, and finishing — in one continuous watch.

VanOaksProps· 15,321 views
UPGRADE Your Ghostbusters Popcorn Bucket
10:03
DIY PropsBeginner$20–$50

UPGRADE Your Ghostbusters Popcorn Bucket

VanOaksProps walks through a paint upgrade process for the Ghostbusters Ghost Trap popcorn bucket available from Regal Cinemas or Spirit Halloween, transforming the stock plastic prop into a convincingly movie-accurate replica. The tutorial relies on a short list of accessible acrylic and spray paints combined with liquid latex masking to achieve a weathered, metallic finish. The result elevates a novelty theater collectible into a display-worthy prop without requiring advanced skills or expensive equipment.

VanOaksProps· 12,742 views
Doc Brown's Binoculars from Back to the Future 2 - AnkerMake M5C
9:14
Costume TutorialsBeginner

Doc Brown's Binoculars from Back to the Future 2 - AnkerMake M5C

This sponsored build video follows the creator in reproducing Doc Brown's futuristic binoculars from Back to the Future 2 as a cosplay prop using the AnkerMake M5C 3D printer. The project leans on a purchasable Etsy model file and the printer's streamlined one-click workflow to keep the build accessible to beginners. The video doubles as a hands-on introduction to the AnkerMake M5C, highlighting its ease of setup and high-speed printing capabilities. The finished prop is a screen-accurate-looking replica suitable for BTTF cosplay.

VanOaksProps· 11,545 views
Making the Goonies Copper Bones Prop Replica
6:35
DIY PropsBeginnerunder $20

Making the Goonies Copper Bones Prop Replica

VanOaksProps walks through the process of prepping and painting a 3D-printed replica of the iconic Copper Bones skeleton key from The Goonies. The build is framed as a relaxed afternoon project, focusing primarily on surface finishing and a layered acrylic painting technique to achieve an aged, metallic patina look. A free STL model is referenced for those who want to print their own base piece. Credit is given to another creator whose technique inspired the painting approach.

VanOaksProps· 10,733 views
Turning my Smart Thermostat into HAL 9000 from 2001: a Space Odyssey
8:04
DIY PropsIntermediate

Turning my Smart Thermostat into HAL 9000 from 2001: a Space Odyssey

VanOaksProps transforms an everyday smart thermostat into a screen-accurate HAL 9000 replica from Stanley Kubrick's 2001: A Space Odyssey. The build centers on a laser-cut grill panel — a free downloadable file the creator shares — combined with brushed aluminum vinyl and metallic spray paint to achieve the iconic look. The result is a functional thermostat that doubles as a striking sci-fi display piece. An Adafruit project is credited as the original inspiration for the replica design.

VanOaksProps· 10,281 views
Star Wars Electro Binoculars & Case
9:36
DIY PropsIntermediate

Star Wars Electro Binoculars & Case

VanOaksProps takes on Luke Skywalker's electrobinoculars from The Empire Strikes Back, building a screen-accurate replica from a 3D-printed model with LED accents, detailed paintwork, and weathering. As a bonus, a custom fabric-lined flight case inspired by Disney's Galaxy's Edge is also constructed to house the finished prop. This entry in the creator's casual 'Let's Make' series focuses on personal passion builds rather than step-by-step instruction. The result is a polished Star Wars replica that bridges DIY prop-making and theme-park fandom.

VanOaksProps· 9,507 views
DIY Ghostbuster Ecto Goggles
8:18
DIY PropsIntermediate$20–$60

DIY Ghostbuster Ecto Goggles

VanOaksProps revives a long-shelved project to complete a screen-accurate set of Ghostbusters Ecto Goggles, using a free Thingiverse 3D model as the foundation. The build focuses on hardware assembly — sourcing specific screws, snaps, and olive-colored belting straps — followed by a multi-layer paint and weathering process using acrylics and oil paint washes. The result is a wearable, movie-faithful replica suitable for cosplay or display. This video kicks off a new series dedicated to finishing abandoned prop builds.

VanOaksProps· 8,258 views
Make Your Very Own Mad Max Steering Wheel!
16:49
DIY PropsBeginnerlow / household materials

Make Your Very Own Mad Max Steering Wheel!

This tutorial walks viewers through building a replica steering wheel inspired by the Mad Max Furiosa films, using everyday household items. The build is presented as an accessible, step-by-step project covering both construction and weathering to achieve that signature road-warrior aesthetic. The approachable tone makes it suitable for first-time prop makers and cosplayers alike.

Creative Geekery· 8,041 views
Building the Hoth Scanner Prop | Star Wars Prop Replica
11:27
DIY PropsAdvanced

Building the Hoth Scanner Prop | Star Wars Prop Replica

This detailed build video walks through the full process of recreating Han Solo's Hoth Scanner prop from The Empire Strikes Back, combining FDM printing, resin printing, and real metal hardware for a screen-inspired replica. The creator covers prop research, surface preparation, and achieving convincing chrome and metallic finishes using accessible paints and buffing compounds. Assembly tips address structural durability, making the finished piece suitable for display or cosplay use.

VanOaksProps· 7,849 views
Can I build the Predator: Badlands Blaster?
17:47
DIY PropsIntermediate

Can I build the Predator: Badlands Blaster?

Creator attempts to faithfully replicate the Weyland-Yutani blaster from Predator: Badlands, working from on-screen reference stills and modifying their design along the way to chase accuracy. The build centers on resin 3D printing, including a standout transparent blue sight element produced with UV resin. The video follows a challenge format — fabrication, finishing, wiring, and a final comparison against the movie prop — rather than presenting a definitive studio-quality replica. It's an honest, story-driven build log that celebrates the creative process as much as the result.

Creative Geekery· 7,245 views
Making a Star Wars Detention Block Holocam
8:54
DIY PropsIntermediate

Making a Star Wars Detention Block Holocam

VanOaksProps walks through a full build of the iconic 57C Holocam — the detention block surveillance camera from Star Wars: A New Hope — using 3D-printed parts sourced from a third-party model file. The tutorial covers the complete workflow from raw prints to finished replica, including cleanup, priming, multi-step spray painting, masking, and final varnish. Attention to screen-accurate color and detail is central to the build. The result is a display-ready collector prop suitable for fans and prop builders alike.

VanOaksProps· 7,042 views
Creating Your Own Dune Thumper Prop: A Step-by-step Guide
10:18
DIY PropsIntermediateUnder $25

Creating Your Own Dune Thumper Prop: A Step-by-step Guide

This video walks through a budget-friendly, step-by-step build of the iconic Thumper prop from the Dune franchise. The creator tackles 3D printing challenges, adds motorization, applies paint finishing, and assembles a miniature desert scene to recreate a recognizable shot from the film. The entire project is completed for roughly $20 using mostly materials sourced at home. It blends prop-making craft with a cinematic eye for fans of the Dune universe.

Creative Geekery· 6,846 views
13X Studios Jason Voorhees (Part 4) Mask UNBOXING
5:33
Prop Reviews

13X Studios Jason Voorhees (Part 4) Mask UNBOXING

This video is an unboxing of a replica hockey mask produced by 13X Studios, inspired by the iconic prop from Friday the 13th Part IV: The Final Chapter. The host examines the mask as a collectible tribute to the 1984 film, released some 35 years after the movie's debut. The short runtime keeps the focus squarely on the mask itself and the presentation of the product.

Haunt Former· 6,188 views
LIVE Proton pack build - from the workshop!
2:27:15
DIY PropsIntermediate

LIVE Proton pack build - from the workshop!

A live workshop session focused on putting the finishing touches on a 3D-printed Ghostbusters proton pack prop. The creator works through the build in real time, giving viewers an over-the-shoulder look at the prop-making process. At nearly two and a half hours, there is plenty of time spent on detail work and problem-solving on the fly.

Creative Geekery· 5,585 views
Building A Working Dune Thumper! #dune #propmaking #thumper
0:56
DIY PropsIntermediate

Building A Working Dune Thumper! #dune #propmaking #thumper

This short build video follows a maker's attempt to construct a functional replica of the thumper device from the Dune universe, using a 3D-printed model as the foundation. The goal is a working prop that replicates the thumper's signature sound or vibration effect. The creator brings a DIY spirit to the challenge, aiming for screen-accurate results with maker ingenuity.

Creative Geekery· 5,251 views
Turning a $10 Screwdriver Set into a Star Wars Movie Prop
12:30
DIY PropsIntermediate$10–$50 depending on resin and materials on hand

Turning a $10 Screwdriver Set into a Star Wars Movie Prop

VanOaksProps walks through a screen-accurate recreation of Rey's scavenged Star Destroyer capacitor bearing from The Force Awakens, starting from a common screwdriver cap and custom 3D-modeled parts. The build covers digital redesign of the prop's distinctive fin and collet details, followed by resin printing and assembly. A thorough painting and weathering sequence—using primer, matte black, Rub n Buff, acrylic washes, and Fuller's Earth—delivers a convincingly gritty, battle-worn metallic finish. A free 3D model file is provided for viewers to replicate the build themselves.

VanOaksProps· 5,113 views
Star Wars Detention Block Holocam (PART 2)
10:03
DIY PropsIntermediate

Star Wars Detention Block Holocam (PART 2)

This concluding build video from VanOaksProps walks through the final assembly, painting, and finishing of a replica 57C Holocam — the iconic detention block security camera from Star Wars: A New Hope. The creator covers precision detailing, multi-stage painting with an airbrush, and the application of vinyl decals and resin accents to achieve a screen-accurate look. References to community build logs on the Replica Prop Forum are cited as key research sources. The result is a display-quality prop suitable for collectors, Star Wars fans, and haunt or set designers seeking cinematic sci-fi scenery.

VanOaksProps· 4,562 views
How To Make the Bespin Comlink Prop - Star Wars The Empire Strikes Back
10:03
DIY PropsIntermediate

How To Make the Bespin Comlink Prop - Star Wars The Empire Strikes Back

VanOaksProps digs into the obscure origins of Lando Calrissian's Bespin comlink from The Empire Strikes Back, tracing it to a real 1945 vintage electrical switch before recreating it as a highly screen-accurate SLA resin 3D print. The build draws on reference imagery and Replica Prop Forum research to nail the prop's distinctive shape and fine surface details. The tutorial walks through the full workflow: print cleanup, sandable primer, screen-matched paint colors, metallic finishes, vinyl detail work, and final assembly.

VanOaksProps· 4,204 views
Easy to Build FLUX CAPACITOR from Back To The Future!
10:34
DIY PropsBeginner

Easy to Build FLUX CAPACITOR from Back To The Future!

This tutorial walks through building a screen-accurate-looking Flux Capacitor prop from Back to the Future, designed for display or themed event use. The build centers on a looping video played through a small media player behind a plexiglass panel framed with decorative trim. The creator developed this piece for a live Back to the Future–themed experience, making it a practical event or home display prop. The approach keeps the build accessible for beginners with minimal tools required.

Creative Geekery· 4,023 views
What Happens When You Drive the Ecto-1 Ghostbusters Car Through Times Square - For This Moment!
4:20
Other

What Happens When You Drive the Ecto-1 Ghostbusters Car Through Times Square - For This Moment!

The Creative Geekery crew takes a Ghostbusters Ecto-1 replica vehicle from Gotham Cinema Rides on a memorable cruise through Times Square in New York City. The outing coincides with the debut of a Ghostbusters-themed advertisement on a Times Square screen, generating spontaneous crowd reactions, tourist photo-stops, and general urban mayhem. The short video captures the infectious energy of a fandom bucket-list moment played out on one of the world's most iconic streets.

Creative Geekery· 2,211 views